PRODUCTS

In this Pre-Blocking Machine the diamond is processed from the side face like manual wheel which results in best blocking.

First of all select programme according to the desired process and then press the offset button and set the line then just press the run button, the software shall automatically set the pressure and make the diamond.

In the Pre-Blocking Machine operators can't set the manual pressure.

Pre-Blocking Machine is such a machine in which complete table of the diamond can be blocked at '0' degree.

In the Pre-Blocking Machine complete diamond can be made with 8 to 16 facets at top and bottom.

In the Pre-Blocking Machine on raw diamond direct facets can be made so need for 2 in 1 machine and blocking machine is very less.

The sticking is done at the top and bottom of the diamond twice, so a complete diamond can be made with 8 to 16 facets.

In the Pre-Blocking Machine angle moves automatically according to the degree.

Facets can be selected by setting the kasar according to galaxy.

The work can be done only after the data input of rough diamond and emery grade into the machine so the diamonds can be processed with the best productivity and minimum damage.

If any facet is found hard in the processing, the software changes the facet on its own. Besides, if the diamond is found hard at the table blocking, the software changes the alignment of the diamond too.

The Pre-Blocking Machine gives fast production, hence reduces the cycle time of the diamond processing..

After table and facet only finishing of the diamond remains..

The operator can select the choice of his language in the software and can easily operate the machine.

Due to the use of the 'AIM' technology if there is any error on the part of the machine operator, it alerts by giving a message and trains him too.

The design of the Pre-Blocking Machine software has been done as per IOT (Internet of Things) therefore 70% service and the machine analysis can be done with support.

One operator can minimum run more than 3 machines.

Log-ins of the operator and the manager being separate the manager can separately set the functions of the machine so that the errors of the operator can be minimized.

Every 30 minutes every mechanical part is automatically lubricated hence no maintenance required in the machine for a long time.

Cooling is maintained on the diamonds as during the process water is automatically supplied in the machine.

Since every process of the machine is video recorded any error can be checked.